-
Made to order grills, rings, Equipment for mounting speakers. Power distributor.
I will execute your order on an individual project.
Approximate steps for ordering:
The description of the rings and grilles,parts, etc.
1. Drawing up individual technical project together with the customer.Please make a picture of the place they going to,manual to speaker or link required. It is desirable (but rather necessary) to make the photo
Clarification of the form, the type and design of products mounting rings(spacers or protective grill: mesh insert or clamp style), polishing, painting, satin finish (Decorative risk until matt) on photo examples from the gallery of works . Selecting protective mesh (grill): small or large, or the model for the manufacture of the machine laser cutting, etc. Model making himself at your request.
Manufacturing grid laser cut (after the approval of the model made by me according to your wishes or designs. Calculation and approval of its value is carried out separately, since its value is higher than the cost of nets made of perforated fabric.
2. I make a sketch and later, together, we specify all the dimensions, namely: which screws are used for mounting,what needed holes - which are necessary threaded holes (m3, m4, etc.) - may be for example a photo.
3. After clarifying all questions overall costwill be determined. Then I run to the work of the queue - about 2 weeks.
4. Payment after manufacture and provide a photo of final work.
Sending international mail EMS to the specified address.
What is included in the final cost and a brief description of the process (for example, rings with a protective mesh)
1. The diameter and thickness of the aluminum blank Rings.
2. its manufacture.
3. The production of holes and thread at a given radius.
3. Further -finishing of the rings-satin finishing, polishing, painting.
There are many examples here by reference (but not all) :)
https://drive.google.com/drive/folde...nc?usp=sharing
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Those of you who don't know, I can vouch for Alexander.... he is good people. I did a high dollar project with him and he delivered, and does EXCELLENT work.
Highly recommended!
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Are you able to make an all in 1 fused power and ground distro?
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Hi. Yes I can . But usually everyone asks for their configuration of electrical consumers.I.e. Individual distributors are made under each project.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
If you need a distributor for your needs - then I need:
1. wire cross-section or types of crimped copper lugs.
2. The number of inputs.
3. The number of outputs.
Better just a freehand drawing, a top view. Anyway, then I'll draw everything for sure.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Very nice work :) Next spring I'll be in touch. Thinking 2 vertical bar grill for Alpine Type R 12 emulating these
https://www.caraudiojunkies.com/atta...589817&thumb=1
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Alexander612
This would be awesome. Power or ground stacked! It would make routing to each amp cleaner. I am interested in this
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Now that's some heavy-duty rings, right there
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Extreme support needed once you get above the OEM level. You know the brand or model of drivers on photo Alex?
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
That's the sexiest audio porn this side of home audio
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
dcfis
That's the sexiest audio porn this side of home audio
Not certainly in that way . In home audio - the wall thickness from mdf can be set to both 70 and 100 mm, but in a car it is impossible. Therefore, aluminum support rings are the way out! They are, as it were, a continuation of the basket and allow you to reveal the possibilities of the speaker 100 percent!
That is, when an audio system is built like this, then this can be called an uncompromising installation option :). Plywood, MDF, plastic - it's all mediocre :)
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Salad-colored aluminum mounting rings - chemically oxidized. This allows them to be glued into an epoxy resin (or putty, etc.).
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
I'm definitely interested in some grills for a Hertz Mille tweeter
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
YellowC4S
I'm definitely interested in some grills for a Hertz Mille tweeter
It can be done. And what exactly brand tweeter?
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Hi guys. Nickel-plated parts for home speakers. (example):
https://i.ibb.co/LzrHV2d/P91202-193557.jpg
форматы картинок
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
An example of a kit for installing a tweeter (midrange) speaker.:
Support mounting ring aluminum - with screw threads,
chemically oxidized for installation in glue or putty.
Ring with aluminum mesh - plating - polished nickel.
https://i.ibb.co/ct2549p/P91218-105424.jpg
https://i.ibb.co/fGP9Ytj/P91218-105442.jpg
https://i.ibb.co/jbXcYb8/P91218-105624.jpg
https://i.ibb.co/TB3DwVT/P91218-105635.jpg
image share
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Morel octopus style grill - on subs. Aluminum anodizing.
https://i.ibb.co/p0grvjn/P91223-181828.jpg
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Just got my order and this thing is beautiful. It's big but exactly what I wanted. https://uploads.tapatalk-cdn.com/201...b9732e0ffa.jpg
Sent from my SM-G975U using Tapatalk
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
ToNasty
I greet you! Excellent. The main thing that you liked it :)
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Alexander612
I greet you! Excellent. The main thing that you liked it :)
Looks very nice and well made the only thing I would have done different if it was mine was to not have the engraving done and just used a label printer. Also the highest draw should be as close to the Batt connection as to not draw power down the buz bar.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Transitman
Looks very nice and well made the only thing I would have done different if it was mine was to not have the engraving done and just used a label printer. Also the highest draw should be as close to the Batt connection as to not draw power down the buz bar.
I'm not understanding. It's a distribution block. 1 run of 1/0 from the battery to it. 3 amps is all that's being used all at 4 ohm.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Transitman
Looks very nice and well made the only thing I would have done different if it was mine was to not have the engraving done and just used a label printer. Also the highest draw should be as close to the Batt connection as to not draw power down the buz bar.
Greetings! Yes, I can do different options. I.e. as the client wishes!
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
ToNasty
I'm not understanding. It's a distribution block. 1 run of 1/0 from the battery to it. 3 amps is all that's being used all at 4 ohm.
The highest load should be on the left nearest to the power input and the lowest demand on the right
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Transitman
The highest load should be on the left nearest to the power input and the lowest demand on the right
That's how it is. Tweeter and mid amp requires more amperage than the sub amp. This is why I did it like this. Sub amp is the smallest of the amps
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
ToNasty
That's how it is. Tweeter and mid amp requires more amperage than the sub amp. This is why I did it like this. Sub amp is the smallest of the amps
I believe that at such small distances
and thickness of a brass plate 8mm - the location of consumers will not affect :)
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Alexander612
I believe that at such small distances
and thickness of a brass plate 8mm - the location of consumers will not affect :)
It wont affect it at all. The main power run is maybe 8 feet. If that. Max draw if I were to wire all amps down would be 220 amps. But I did a draw test already and all 3 amps how I'm using them only draw about 120 amps. Which is nothing
Sent from my SM-G975U using Tapatalk
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Maybe someone is interested:
housing and mounting additional sensors on the steering column:
https://i.ibb.co/0Z9d0ct/P91224-152029.jpg
https://i.ibb.co/8MwJjwr/P91224-152118.jpg
https://i.ibb.co/pwKsLTN/P91224-152126.jpg
I can make any configuration and sizes.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Transitman
Looks very nice and well made the only thing I would have done different if it was mine was to not have the engraving done and just used a label printer. Also the highest draw should be as close to the Batt connection as to not draw power down the buz bar.
Yes . UV printing on plexiglass is possible. But it costs more :)
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Comrades, is anyone interested in custom amplifiers? Makes my friend in Russia.
I can throw off photos and specifications. For myself, I chose them for a long time and put them on a two-way front. Before that there were brax, sinfoni, steg - not that :).
Amplifiers are intended only for high-quality amplification -sq. --- Not for pressure !!!
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
Alexander612
Comrades, is anyone interested in custom amplifiers? Makes my friend in Russia.
I can throw off photos and specifications. For myself, I chose them for a long time and put them on a two-way front. Before that there were brax, sinfoni, steg - not that :).
Amplifiers are intended only for high-quality amplification -sq. --- Not for pressure !!!
I'm always interested in seeing what else is out there
Sent from my SM-G975U using Tapatalk
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
The prototype of the circuit is an excellent home amplifier, adapted for 12-16 volts and slightly modified - like this: http://noosfera-amps.ru/ru/
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Today, two models are being assembled: single-channel units and two-channel ones. These amplifiers are bare terminal amplifiers. Without filters and designed for processor systems.
https://i.ibb.co/Y8Nt9fK/IMG-20200103-WA0009.jpg
https://i.ibb.co/jL0RBgP/IMG-7194.jpg
https://i.ibb.co/3yXTC56/IMG-7207.jpg
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Priced and specs for the car amps please. Always looking to try something new
-
Re: Made to order grills, rings, Equipment for mounting speakers. Power distributor.
Quote:
Originally Posted by
ToNasty
Priced and specs for the car amps please. Always looking to try something new
A little later I will send a full alignment!