-
03-24-2023
#1
Junior Member
2018 Silverado (non-Bose) Wiring Help
Hi -
I'm not new to car audio and have installed my own system in my old 2008 Impala. I had an aftermarket head unit with three rca outputs. I have a crescendo bass clef bc2000d for my two kicker cvx 4ohm, and a pioneer gm-a4704 to power my mid's and highs which are two 2.75", 2 6/9, and two 6.5", all Kicker.
I have seen people splice into the wires and run to their LOC. I have never used an LOC. I am going to buy an audio control lc7i, and was planning on buying a wiring harness. Would I have to run the wires from the harness to the back of the truck into the LOC? Could I tap into the wires going to the speakers instead? Would a harness even be worth it? I'm confused on the wiring.
-
03-25-2023
#2
Re: 2018 Silverado (non-Bose) Wiring Help
If you don’t want to cut/splice the factory wiring (if you’re using the OEM wiring to your speakers, it would be cut, not spliced), you’ll need some form of T-harness. Basically you are disconnecting the speakers from the OEM unit and feeding the outputs into the LC7i and then connecting the speakers to your Pioneer amp.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Back To Top